Location: Home » News Center » news » faqs
Products
industrial wastewater treatment equipment
industrial wastewater treatment equipment
The pollution hazards caused by industrial wastewater to the environment, and the prevention and control measures that should be taken, depend on the characteristics of industrial wastewater, that is, the type, nature and concentration of pollutants. The water quality characteristics of industrial wastewater vary not only according to the type of wastewater, but often change with time and place.
Animal/pet incinerator
Animal/pet incinerator
Structure: Horizontal
Dimensions (mm): 1080*680*700-2850*1750*1720 (customizable)
Power (kw): 0.44-3.51 (customizable)
Chimney (mm): Φ140*6m-Φ620*6m (customizable)
slaughter sewage treatment equipment
slaughter sewage treatment equipment
The main source of slaughter wastewater is a series of sewage discharged from the slaughter process, including: post-slaughter washing, disintegration washing, viscera washing, floor washing, and livestock manure wastewater. Sewage contains a lot of organic matter, such as animal feces, blood, animal visceral debris, animal hair, minced meat and oil, etc.
Domestic sewage treatment equipment
Domestic sewage treatment equipment
Choose the appropriate treatment process and related equipment according to the waste water volume and water quality. Ensure that the sewage can be effectively treated to reach the discharge standard, and it can save energy consumption and economic investment.
food industry wastewater treatment equipment
food industry wastewater treatment equipment
The characteristics and hazards of food industry wastewater: The food industry wastewater has the characteristics of large amount of wastewater, high content of organic matter and suspended matter, perishable, and relatively low toxicity. The untreated wastewater is discharged into the water, making the water rich in nutrients, quickly consuming dissolved oxygen in the water, and killing fish and aquatic organisms.
Horizontal medical waste incinerator
Horizontal medical waste incinerator
Structure: Horizontal
Dimensions (mm): 900*600*700-3000*1750*1710 (customizable)
Power (kw): 0.44-3.34 (customizable)
Chimney (mm): Φ140*6m-Φ620*6m (customizable)
News
Municipal waste incinerator, specializing in waste disposal problems
Municipal waste incinerator, specializing in waste disposal problems
A very important aspect of urban development is green and environmental protection. Vigorously promoting waste incinerat...
The IAR base of University of Shanghai for Science and Technology settled in Hongli Shengde
The IAR base of University of Shanghai for Science and Technology settled in Hongli Shengde
On the morning of October 24, 2015, Shandong Zhucheng Hongli Shengde Environmental Technology Co., Ltd. and the Universi...
What is the reason for the positive pressure during the operation of the domestic waste incinerator?
What is the reason for the positive pressure during the operation of the domestic waste incinerator?
The main purpose of waste incinerator incineration is to burn as much waste as possible, make the burned materials harml...
Embbasy of India to China Office and Domestic Waste Incinerator
Embbasy of India to China Office and Domestic Waste Incinerator
Project owner: EMBASSY OF INDIA
Project location: Beijing
Waste type: Office and domestic waste
Proces...
Mongolia 50-100kg/h Industrial Waste Incinerator
Mongolia 50-100kg/h Industrial Waste Incinerator
Project owner: TSETSUUH TRADE LLC
Project location: Ulaanbaatar, Mongolia
Waste type: Industrial waste
...
Customers from Japan, South Korea and Malaysia come to holy shield for field inspection and cooperation
Customers from Japan, South Korea and Malaysia come to holy shield for field inspection and cooperation
In this beautiful winter, holy shield welcomed guests from Japan, South Korea, and Malaysia to visit the company. We car...
How to deal with the smoke and dust from the garbage incinerator of Holy Shield?
How to deal with the smoke and dust from the garbage incinerator of Holy Shield?
A large amount of smoke and dust will inevitably appear in the garbage incineration process, but the smoke and dust that...
Introduction to the treatment standards of buried hospital sewage treatment equipment
Introduction to the treatment standards of buried hospital sewage treatment equipment
Holy Shield's buried hospital sewage treatment equipment adopts international advanced biological treatment technology.
Garbage incinerators: a better way to dispose of waste
Garbage incinerators: a better way to dispose of waste
Garbage incinerators are equipment for burning domestic garbage. Domestic waste is burned in the furnace and converted i...

Contact us

  • Hengliu Road, Economic Development Zone, Zhucheng, Weifang, China
  • sales@zchlsd.com
  • +86 15163609309

What is the reason for the positive pressure during the operation of the domestic waste incinerator?

Release date:Nov 13,2021 Source:Hongli Shengde Pageviews:-
The main purpose of waste incinerator incineration is to burn as much waste as possible, make the burned materials harmless, reduce the volume, reduce the generation of new pollutants, and avoid secondary pollution. If positive pressure occurs during operation, it is usually caused by the following reasons:

The main purpose of waste incinerator incineration is to burn as much waste as possible, make the burned materials harmless, reduce the volume, reduce the generation of new pollutants, and avoid secondary pollution. Generally speaking, the domestic waste incinerator should maintain negative pressure operation in the incinerator.

If positive pressure occurs during operation, it is usually caused by the following reasons:

1. There are too many materials to be burned in the furnace, and the incineration load is too heavy.

2. The induced draft fan shuts down or the induced draft fan system has a problem.

3. Too much fuel is added or the calorific value of combustibles is too high.

4. The furnace ash accumulates in the furnace too much, resulting in a smaller space in the furnace.

5. The pipe is blocked.

Holy Shield domestic waste incinerator

The main features of waste incineration technology:

1. The project land is saved. In the case of the same amount of waste treatment, the land area required for the waste incineration plant is only 1/20-1/15 of the waste sanitary landfill;

2. Fast processing speed. The decomposition time of garbage in sanitary landfills is usually 7 to 30 years. As long as the melting point of the garbage is lower than 850℃, the incineration process can be completed in about 2 hours;

3. Good volume reduction effect. For the same amount of waste, landfill can be reduced by about 30%, composting can be reduced by about 60%, and incineration can be reduced by about 90%;

4. Low pollution emission. According to the research of the German Environmental Research Institute, if the same strict EU pollution control standards are adopted, the pollution caused by garbage incineration is only about 1/50 of that of sanitary landfills;

5. High energy efficiency. Every ton of garbage can be incinerated, generating more than 300 degrees of electricity. The domestic waste generated by about every 5 people can meet the daily electricity demand of 1 person through incineration and power generation.

Generally speaking, for large and medium-sized cities with dense populations, developed economies, and scarce land resources, garbage incineration should be adopted. At present, Holy Shield's high-temperature waste gasifiers mainly include household waste incinerators, industrial waste incinerators, animal incinerators, medical waste incinerators, etc., which can meet various waste treatment needs. The product has the advantages of easy operation, full combustion, automatic control, reliable insurance, convenient maintenance, and low investment.

【Tag of this article】:Holy shield domestic waste incinerator
【Editor】:Hongli Shengdeall rights reserved:https://www.holyshieldenv.comPlease indicate the source